1. Turn off and on your Pods again
The rule of the thumb here is to make sure that you turn on your Pods only after you have launched your application and either proceeded to My Devices screen or have completed your program and muscle group selection and proceeded to the pre-stimulation screen (with the body set up picture). If your Pods were already on, turn them off and on again, then give app around 20-25 seconds to re-connect to your Pods.
2) Restart Bluetooth, App and Pods.
Exit PowerDot app using Android Back button and turn off your phone's Bluetooth. Turn off your Pods. Turn off Bluetooth on your phone. Start PowerDot app. Make your program/muscle group/stimulation level selection or tap on one of the recently used workouts. Turn on the first Pod and make sure it gets connected up to the "Device is Ready" stage. Turn on the second Pod and once it is connected, tap Get Started button to begin your session.
3. Toggle Advanced BT Bonding option.
If 1) and 2) does not help, please turn off Advanced BT Bonding switch available from PowerDot app Setting screen. It is needed to be On for most of the latest phones and Off for the older models or phones running older versions of Android (4.4 or 5.0).
4. Restart your phone.
5. If nothing helps, try full re-pairing.
If neither or the above options helps, consider running full Android re-pairing procedure, including clearing of Android Bluetooth caches.
1. Manually Reset Pod(s)
Turn Pod(s) on, Hold power button for 5+ seconds, PowerDot(s) light will blink then shut off after reset.
2. Remove Pod(s) from PowerDot app
Open PowerDot app, Go to My Devices (navigate to oval icon in the shape of Pod with a flash over it). For each active PowerDot device: tap and hold a finger on a PowerDot device image for around two seconds, until you see a black circle with a cross appearing at the top right. Tap on the cross. Close out PowerDot app by tapping on the Android Back button
3. Remove Pods from Bluetooth
Open Settings on smart phone/device, Open Bluetooth Settings and turn on Bluetooth. Click on the cog next to PowerDot-X or aPowerDot-X device(s). Select Unpair. Turn off then turn on Bluetooth (soft reset)
4. Clear up Android Bluetooth cache
Open Settings on smart phone/device, Select Applications -> Application Manager, Select Show System Apps option available from the More menu. Select Bluetooth Share -> Storage. Tap on Clear Cache and Clear Data.
5. Re-activate Pods in the PowerDot app
Open PowerDot app, Go to My Devices (navigate to oval icon in the shape of Pod with a flash over it). Tap on "Scan" at the top right corner. Turn on the First Pod. When Pod is found, tap on the circle in the middle of Pod. Wait for the light on the Pod to blink and battery icon to show up on App (below the Pod image). If Pod failed to activate, turn your Pod off and on again, tap on it in the App again. Tap on "Re-scan" at the top right corner. Turn on the Second Pod. When Pod is found, tap on the circle in the middle of Pod. Wait for the light on the Pod to blink and battery icon to show up on App (below the Pod image).